HserPrintByteCRLF

Syntax:

	HserPrintByteCRLF  user_data [, 1 | 2  | 3 | 4 ]

Command Availability:

Available on all microcontrollers with a USART or UART module.

Microchip PIC supports USART1 and 2.
Atmel AVR supports USART 1,2,3 and 4.

Explanation:

This command will send a byte given by user_data using the hardware USART module and then send the ASCII codes 13 and 10. ASCII codes 13 and 10 equate to a carriage return and line feed.

Example:

	'This program will send the status of PORTB through the hardware serial module.

	HserPrintByteCRLF 65    ' Will print a single A on the terminal
	HserPrintByteCRL  "A"   'Will print a single A on the terminal

See also HserPrintCRLF