HI2CStart

Syntax:

    HI2CStart

Command Availability:

Only available for microcontrollers with the MSSP module..

Explanation:

If the HI2C routines are operating in Master mode, this command will send a start condition. If routines are in Slave mode, it will pause the program until a start condition is sent by the master. It should be placed at the start of every I2C transmission.

Note:

This command is also available on microcontrollers with a second hardware I2C port.

    HI2C2Start

Example:

Please see HI2CSend and HI2CReceive for examples.

Supported in <HI2C.H>